VMS 193

Medium floor model, ideal for long products
Digital control panel with 10 programs
Stainless steel chamber
Flat transparent lid

Contact me about this product
Vi registrerer disse data ( Navn og E-mailadresse) og bruger dem kun i forbindelse med svar retur og i tilfælde af fremadrettet samarbejde.
Data bliver slettet senest efter 3 måneder, hvis der ikke sker et videre samarbejde.
Vi videregiver ikke data til 3. part og bruger dem ikke til andre formål.
 
Technical detailsVMS 193
Seal width3,5 mm double seal
Seal bar configurationStandard: left and right ( short), Option: left and front (long)
Net seal bar length310 mm, short
930 mm, long
Effective chamber size890 x 310 mm, short
930 x 270 mm, long
Absolute chamber size990 x 320 x 100 mm
Dimensions1065 x 480 x 960 mm
Pump capacity63 m3/time
Voltage400 V
Consumption2400 - 3100 W
  • Options: 
  • Sensor control
  • Bag cut-off seal
  • 8mm single seal
  • Seal 1-2
  • Gas flush (2 gas pipes on each bar)
  • Gas kit
  • Tilted plate for liquid containing bags
  • 230/400 V - 3 Ph - 50 Hz
  • 100 V - 1 Ph - 50/60 Hz
  • 200 V - 3 Ph - 50/60 Hz
  • 110/115 V - 1 Ph - 60 Hz
  • 220 V - 1 Ph - 60 Hz
  • 208/230 V - 3 Ph - 60 Hz
  • 220/380 V - 3 Ph - 60 Hz
  • Standard functions: 
  • Vacuum (timer control)
  • Seal
  • Soft-air
  • Extended functions: 
  • Multi-cycles
  • Gas plus function
  • Expansion reduction
Gas plus function
Gas plus function is an extra gas flushing time during the closing of the seal bars, allowing to put more gas inside the bag to make ballooning packages. To use this function, gas flush option should be equipped on the machine.

Seal 1-2
Seal 1-2 is an extended option for the cut-off seal. It enables controlling the seal time for cutting wire and sealing wire separately. For example, seal wire can be set at 2,5 seconds and cut-off wire at 3,5 seconds. In this way, thick shrink bags can be sealed and trimmed without having melted seal.

 
Expansion reduction
Expansion reduction is a special function for packaging large piece of fresh meat. By using this function, drip loss and bubble forming problems will be solved. Expansion reduction allows external air to flow into the decompressed chamber for a short time (0.1 – 1.0 second) together with the closing of the seal bars. By slightly loosening the surrounding pressure, gas and water in the meat cell do not come out into the package.